Mold culture box
Product Detail
Product Tags
Mold culture box:
● Large screen LCD display
● Internal circulatory system
● CNC and laser sheet metal processing
● Humanized design
● Security function guarantee
● Screen lock feature
Mold culture box characteristics: It is widely used in mold screening, microbial tissue cell culture, fungal Spore culture, food and drug preservation experiments,and seed germination.
Energy saving design
● The box seal ring adopts the new synthetic silicone seal strip, which has better sealing effect and effectively prevents heat loss. Compared with the traditional equipment, it saves energy by 25%.
● According to the size of the environment temperature and load, the control parameters can be automatically adjusted to achieve the optimal heating mode and reduce energy consumption.
● High efficiency and energy saving compressor, intelligent instrument control compression start stop, stable temperature control, low power consumption
Control of intelligent LCD screen
● Large screen LCD, real-time display of parameters, screen self-locking function, simple and convenient operation.
● Menu type operation interface, simple and convenient operation, can set temperature and time parameters quickly.
● Operation function: fixed value operation, timing operation, running time, screen display "END" and buzz reminder.
● The program control instrument can be programmed with up to 30 procedures, controlling temperature and time, and setting 1-9999 minutes for each period.
Internal circulation system
● The fan adopts German high quality fan and big leaf wheel fan, which has higher ventilation efficiency and better temperature uniformity.
● The system adopts back suction and vertical air supply at the bottom.
● The diaphragm hollowed out by laser has better ventilation effect and better temperature uniformity.
Special sheet metal processing
● The box is formed by laser cutting once, the outer box is made of high quality cold rolled steel sheet, and the surface is anti-static.
● The entire stainless steel plate of the clapboard is formed at one time without welding spot, and the load-bearing beam is added at the bottom of the partition board, and the bearing capacity is stronger.
● The baffle can be detachable, freely adjusted up and down, and the minimum spacing is 30mm.
● The clapboard has slideway bayonet design to prevent the clapboard tilt and dislocation.
● Large arc angle design, no dead angle, easy to clean and maintain.
● Stainless steel wire drawing treatment, strong corrosion resistance
● Double door design, built in tempered glass doors, observe objects in the studio at a glance.
● The door ring seal is made of magnetic rubber strip, which is simple and convenient.
User friendly design
● The menu is available in Chinese and English to meet different language needs.
● Can be converted to ℃/℉
● Four angle universal wheel, front wheel with brake disc to prevent equipment from shaking.
● Arbitrarily adjusting the position of the tray
● Power down memory function
Security function
● The equipment is equipped with leakage protection device to ensure the safety of the operator and the safety of other equipment in the laboratory.
● The system has a limited temperature controlled acoustooptic alarm system, which exceeds the limit of temperature and stops heating, exceeding the alarm temperature, sound and light automatic alarm.
● Self diagnostic function: display fault information and facilitate troubleshooting.
● Stainless steel heating pipe, corrosion resistance and long service life
● Refrigerant: internationally recognized R134a environment-friendly refrigerant, which is non flammable, non explosive, non-toxic, non irritating and non corrosive. It has good safety performance.
Note: the performance parameters are tested under no load conditions, the ambient temperature is 25 degrees,
型号尺寸 / 说明(MJX系列) |
150 |
250 |
350 |
450 |
||
Internal parameters |
Control temperature range |
℃ |
0~60 |
|||
Temperature Resolution |
℃ |
0.1 |
||||
Constant temperature fluctuations |
℃ |
±0.5 |
||||
Relative Wet Control Range |
RH |
55%~95%(功能型) |
||||
Relative Humidity Volatility |
RH |
±3%~±5%(功能型) |
||||
Working Environment Temperature |
℃ |
+4~35 |
||||
Product Material |
Inner bile material |
stainless steel |
||||
Shell Material |
Cold rolled steel sheet anti-static spray molding |
|||||
Material for carrier partitions |
stainless steel |
|||||
Number of standard partitions |
piece |
3 |
3 |
3 |
4 |
|
Plate weighing |
(kg) |
10 |
||||
Product Size Weight |
Internal dimensions |
wide |
505 |
550 |
550 |
700 |
deep |
380 |
450 |
550 |
550 |
||
high |
800 |
1050 |
1150 |
1200 |
||
volume |
(L) |
150 |
250 |
350 |
450 |
|
Shape Size(mm) |
wide(W) |
630 |
680 |
680 |
830 |
|
deep(D) |
600 |
660 |
770 |
750 |
||
high(H) |
1450 |
1710 |
1870 |
1860 |
||
Packing Size(mm) |
wide |
760 |
790 |
810 |
880 |
|
Net weight |
deep |
710 |
770 |
900 |
950 |
|
high |
1610 |
1860 |
2020 |
2020 |
||
Total weight |
(kg) |
100 |
120 |
140 |
160 |
|
Packaging materials |
(kg) |
120 |
150 |
160 |
180 |
|
wood |
||||||
Electrical parameters |
Voltage / Current |
V/Hz |
220/50 |
|||
power |
W |
700 |
740 |
790 |
1330 |
|
power cord |
12 |
12 |
1.5 2 |
1.5 2 |
Purchase
1、independent temperature limit controller 2、 test hole 3、BOD socket 4、 printer or 485 interface